New Construction Stage Inspections
Independent checks at every critical build stage — catch problems before the next stage buries them.
QBCC Licensed BuilderLicence 15014911 — verify
Master BuildersMember 72047
Termatrac CertifiedTermite radar technology- Professional IndemnityInsurance held
- Public LiabilityInsurance held
- Same-Day ReportsOr the pest fee is waived
Construction stage inspections are independent quality checks carried out at the key milestones of your new build: slab, frame, lockup and fixing. At each stage, a licensed builder-inspector — many of ours have engineering backgrounds — visits your construction site, examines the work against the approved plans and current Australian Standards, and reports before the next stage covers it up.
Timing is everything in construction. Reinforcement placed incorrectly disappears under concrete; framing faults vanish behind plasterboard. Once concealed, these defects are expensive and disruptive to expose and repair. Inspecting at each stage means problems are corrected while they are still simple, visible and the builder's clear responsibility.
This service suits anyone building a new home in Brisbane, Logan, Ipswich, the Gold Coast or Moreton Bay who wants oversight that is genuinely independent of the builder. Each visit produces a certified photographic report on the same day.
What's included
- Slab stage: set-out, formwork, reinforcement placement, plumbing penetrations and slab finish checked against the engineering plans
- Frame stage: wall and roof framing, tie-downs, bracing and structural connections verified before linings are installed
- Lockup stage: brickwork or cladding, roof covering, sarking, windows and external doors assessed once the shell is enclosed
- Fixing stage: internal linings, waterproofing, cabinetry, doors, architraves and fit-off work reviewed before completion
- Workmanship compared against approved plans, the building contract and current Australian Standards
- Moisture meters and thermal imaging used where concealed water issues are suspected
- Photographic evidence of every defect, keyed to its location on site
- A clear rectification list you can issue directly to your builder at each stage
- Re-inspection available to confirm previous-stage defects were actually corrected
- A certified same-day report after every stage visit
Ready to book? This inspection starts from $500.00.
Book this inspectionWhy it matters
Defects caught early
Problems found at slab or frame stage cost little to fix; the same problems found after handover can require major demolition.
Keeps builders accountable
Builders lift their game when they know an independent, licensed inspector is reviewing each stage of the work.
Engineering-level scrutiny
Inspectors with engineering backgrounds verify structural elements — reinforcement, tie-downs, bracing — against the approved design.
Certified stage reports
Every stage visit produces a certified photographic report the same day, building a complete quality record of your home.
Areas we inspect
- Brisbane
- Logan
- Gold Coast
- Ipswich
- Moreton Bay
Report turnaround
A certified report is issued the same day as each stage inspection, keeping your build moving.
Frequently asked questions
What do construction stage inspections cost?
Individual stage inspections start from $500 — for example, a slab or foundation stage inspection is from $500, and frame stage from $550 for a single-storey home. Most clients book the full set of stages; contact us for a package quote tailored to your build.
Which stages should I have inspected?
We recommend all four key stages — slab, frame, lockup and fixing — plus a handover (PCI) inspection at completion. Each stage conceals the one before it, so skipping a stage leaves a permanent blind spot. If budget is tight, slab and frame are the most critical because they cover the structure.
How quickly do I get each stage report?
Every stage inspection receives a certified report on the same day as the visit. Builders often only pause briefly between stages, so same-day reporting ensures your rectification list reaches them before the next stage starts covering the work.
Can you inspect if my builder resists third-party inspections?
Yes. You are entitled to engage an independent inspector for your own build, and access is arranged with reasonable notice through the builder or site supervisor. Our inspectors are QBCC-licensed (licence 15014911), insured and experienced on active construction sites, and we conduct every visit professionally and cooperatively.
What happens when you find a defect mid-build?
The defect is photographed, described and referenced against the plans or relevant standard in your stage report, which you forward to the builder for rectification. We can then re-inspect to confirm the fix before the next stage proceeds. This paper trail is invaluable if any dispute arises later.
Related services
Handover / PCI Inspection
A practical completion (PCI) inspection of your newly built home before you accept the keys, checking workmanship and fi…
From $450.00
Builder Defects Warranty Inspection
A detailed inspection of your home before the builder's statutory warranty period expires, documenting defects and incom…
From $500.00
Ready to book your inspection?
Get a fast quote for any property in Brisbane, Logan, Gold Coast, Ipswich or Moreton Bay — comprehensive report delivered the same day.